Communication Systems for Distribution Networks

ZIV’s portfolio includes networking solutions for distribution networks, broadband PLCs, as well as sensors, couplings and filters for the deployment of smart devices in MV and LV networks.

LAN & Cellular

UMML – 4G LTE Modem with Worldwide Coverage

4UMML 4G LTE modem provides Wireless Data Communications to enable Remote Control of Smart Grid devices. The 4UMML cellular modem is a compact device optimized for data transmission and using different services offered by the mobile operators. Rapid implementation The 4UMML modem offers rapid implementation of current telecontrol and AMR applications in order to take full advantage of 4G technologies: [...]

SIP-3 – IP Encapsulation & Protocol conversion

Serial to IP encapsulation and 104 – 101 Gateway  functionality Basic encapsulation function: point-to-point connection between two serial devices over TCP/IP networks. 104-101 Gateway function: conversion between 60870-5-104 protocol (control center side) and 60870-5-101 protocol (RTU side). Key features 1 or 2 Fast Ethernet (optical/electrical) ports. 1 or 3 serial ports. Cellular 2G, 3G or 4G interface. 1 service serial [...]

SW3 – Compact Switch (DIN rail)

IEC-61850 Ethernet Switch for Secondary Substations Small-size switch that fulfills all the required functions to set up a reliable network within a Secondary Substation. Key features Complies with harsh EMC standards. Brings the necessary capabilities to implement the automation
 of Electrical Substations according to the IEC 61850 standard. Mechanical enclosure for DIN rail mounting. Front port arrangement. 2 Gigabit Ethernet [...]

SIP-2 – Versatile Router

Versatile router for Secondary Substations. Easy integration of Non-IP serial devices into a secure IP network. Key features Designed to operate as a WAN router and a serial to IP encapsulation device. 2G, 3G and 4G transmission technologies. Dual SIM operation to provide access to more than one operator. 1 or 2 Fast Ethernet ports. RS-232/RS-485 interface to perform serial to [...]

EMR-2 – Compact WAN Router

Compact WAN router for Secondary Substations Data transport for services in MV Secondary Substations. Key features Intended for harsh industrial conditions, exceeding the stringent levels of isolation, immunity and protection. GSM/GPRS (2G), UMTS/HSDPA (3G) and LTE (4G) transmission technologies. Dual SIM operation to provide access to more than one operator. 1, 2, 4 or 6 Fast Ethernet ports. Version with [...]

Broadband PLC

ZBP-1 – MV PLC Equipment

MV PLC communications - Distribution Line Carrier for urban environment Main applications: Data transmission in mid-distance levels (urban environment) + Connectivity between Distribution Transformer Centers (DTC). The main purpose of the ZBP-1 is data transport for services in Medium Voltage Secondary Substations to a Primary Substation. The ZBP-1 is a good option for transmitting data at high speed between Distribution [...]

PLC Couplers

CAMS-10/RC – Combined Sensor & Coupler

Combined sensor & PLC coupler for MV power lines A capacitive PLC coupler and a voltage divider are integrated in the same device. Key features Complete solution for distribution grid monitoring. Indoor (masonry switchgear and AIS) and outdoor use. Frequency range: 100 kHz ÷ 10 MHz. Coupling type: Phase-to-ground by capacitor of 10 nF. System voltage (between phases): 24 kVrms. Accuracy: [...]

ACA-500/ACA-36 – Capacitive Coupler

Capacitive PLC coupler (wideband transmission) For injecting and transmitting the PLC signal over the MV phase-to-ground distribution feeders. Key features For installation into a symmetrical tee connector in gas insulated switchgear (GIS). Dimensions comply with UNE EN-50181 standard. Frequency range: 2 ÷ 30 MHz. Coupling type: Phase-to-ground by capacitor of 500 pF. System voltage (between phases): 24 kVrms (ACA-500). 36 kVrms (ACA-36). [...]

CAMS-10C – Capacitive Coupler

Capacitive PLC coupler For injecting and transmitting the PLC signal over the MV phase-to-ground distribution feeders. Key features Indoor (masonry switchgear and AIS) and outdoor use. Frequency range: 100 kHz ÷ 10 MHz. Coupling type: Phase-to-ground by capacitor of 10 nF. System voltage (between phases): 24 kVrms. Protection elements: MV side: draining to earth of 50 Hz current and gas surge [...]

Voltage Sensors

DRMO-1/10K/05 – Voltage Sensors for Air Insulated MV Facilities

Essential Component for MV Distribution Automation Deployments DRMO sensors provide high accuracy MV measurement for indoor and outdoor air insulated switchgear. They are are a must have device for distribution automation deployments in overhead and underground medium voltage networks. The compact design enables a perfect fit in MV indoor and outdoor air insulated switchgears. The DRMO has 0.5% accuracy class, [...]

ACA-1R – Sensor for Distribution Automation and AMI deployments

Resistive voltage sensor intended for installation into a symmetrical tee connector in gas insulated switchgear (GIS). ACA series sensors and couplers are an essential component for Distribution Automation and AMI deployments. The ACA series provide high accuracy sensors and superior performance broadband PLC couplers for MV gas insulated switchgears.  ACA series sensors are must have devices for distribution automation deployments. Enabling an unprecedented degree of integration by providing a compact design [...]

Copyright © 2021 ZIV. All rights reserved.