EV chargers – Smart & robust charging solutions

ZIV spot,

a compact device recommended for private & corporate use

ZIV Star,

a robust desing, recommended for corporate & public use

  • Built in protections
  • Single phase (11kW pers socket) or Three phase (22kW pers socket)
  • Suitable for Simultaneous &  semi fast charging
  • Dual socket or cable
  • Anti-vandalism cover

Wich one suits you better?

ZIV SPOT ZIV STAR
To be used in Private use
Public Use (eg. Hotels, Supermarkets,Parking lots, Community Garage where 2 sockets per unit are required)
Corporate Use ( consulte equipo recomendado según condiciones de uso)
For 1 vehicle (Max 22 kW)
2 vehicles (Max 11 kW -single phase model)
2 vehicles (Max 22 kW -three phase model)
Enclosure Plastic
Metallic Anti-vandalism Cover
Plugs Socket or Hose (cable) available
Single Deported socket
Single & Dual socket / hose (cable)
Inbuilt protections Magnetothermic
Differential Protection
Wifi

Functional Level 

  • Authentication
  • Start / stop
  • Entry/Exit Lockout
  • Recharge schedule
  • Query historical recharge data
  • Set the maximum static power
  • Allow dynamic power management (load balancing)

ZIV EV APP

Technical Data

Key features​

POWER
  • Max power 7,4/22 kW (1Ph/3Ph) | 22 Max 11 kW –single phase model/44kW (ZIV Star)
  • AC 230-400 V / 16-32 A Frecuency
  • 50/60 Hz
DISPLAY & LEDS
  • Integrated display with access to all charger information
  • LED indicator lights for charging status. 1 Display, 4 Buttons, 2 LEDs , 1 metering
COMMS
  • Total connection to improve maintenance, recharge management and SW updates
  • Bluetooth, 3G, OCPP 1.6J and Modbus communication
  • Pins: 2 RJ-11(RS-485) ; 1 Pin Home AC; 1 Pin Hilo Pilot wire according to IEC 61851-1
ENCLOSURE
  • Customization to the customer’s brand using vinyl or plastic
  • ABS plastics (ZIV Spot) | Metallic anti-vandalism cover (ZIV Star)
KEY FEATURES
  • Hose/ deported Socket (ZIV Spot) | Dual Socket for simultaneous charging (ZIV Star)
  • Mark CE – IEC 61851-1 Ed3.0
  • DC leakage current protection | + Magnetothermic & Differential Protection (ZIV Star)
  • Mode 3 charge
  • Configuration in APP and Display

Electrical & Mechanical parameters​

ZIV SPOT ZIV STAR
Charge Mode Mode 3 according to IEC 61851-1
Input supply voltage 230V 1Ph+N+PE, 50/60Hz
400V 3Ph+N+PE, 50/60Hz
Power output Single plug: Up to 7,4 kW (1ph) and up to 22 kW (3ph)
Dual PLUG: Up to 7,4 kW (1ph) and up to 44 kW (3ph)
Type of earthing (depends on the installation) TT by Defect
TN for UK
Socket type Type 2 socket according to IEC62196-2
Socket type 2 according IEC62196-2 with 5m cable
Inbuilt protection DC leakage detector (6mA)
Relays for overcurrent protection
Magnetothermic
Differential Protection
Overvoltage category OV Cat. III (Requires external Surge Protection Device)
Energy meter Class B (A) 2 (R) EN 50470-3
Standby consumption < 1.5 W per phase
Cable feed Bottom
Cable Output Bottom
Protection degree IK10
IP 54
IP55
Insulation Class I (earth terminal)
Enclosure Plastic
Reinforced Aluminium, anti-vandalism
Mounting Wall or ground using charger pedestal
Operation temperature -25ºC to +55ºC
Storage temperature 85ºC
Altitude <2000m
Relative humidity 5-95% With no condensation
Cable handle (cable support) Opcional

User interface 

Connectivity

LTE, Ethernet, Bluetooth, RS485

User authentication

RFID MIFARE card reader, APP

User interface

APP ZIV
LCD screen 22 x 70 mm
4 buttons

Status indication

2 status LEDs
1 Energy Pulse LED (kWh)

Communication protocol

OCPP 1.6J
Bluetooth
Modbus RTU

Connection ports

RS485 connector (RJ11)
4 pin male connector (PWM,CP, PP)
USB C
RJ45 (ethernet input for models with Modem)

Certificates 

IEC 61851-1:

2017 Electric vehicle conductive charging system

IEC 61851-21-2:

2018 Electric vehicle conductive charging system

IEC 60068-2-30

(Test DbEnvironmental testing

IEC 60068-2-1

(Test Ad) Environmental testing

IEC 61439-7:

2018 Low voltage switchgear and control gear assemblies.

Literature

Contact
Copyright © 2024 ZIV. All rights reserved.