Cabinets & Accessories

Project Engineer – Software Systems (UK)

Job description These roles are based in ZIV Automation UK, located in Newcastle-upon-Tyne, UK. These are a key roles in a new area for the business delivering IT solutions to customers. The candidates must have relevant experience in integrating and delivering software systems, including requirements management, test environments & platforms, system integration, test, QA, and release process. The candidates must [...]

Projects Manager (UK)

 

Software Systems Engineer UK (Remote)

Job description This position can be a remote position for systems delivered through ZIV UK and will require interaction and support for end customers. It is a key role in a new area for the business delivering IT solutions and will be responsible for streamlining the test, delivery, and support of these software systems. This includes the implementation of automated [...]

ZIV e-NET tool 

One tool for all IEDs & Systems: it provides a friendly interface to program all the IED features and settings, and access all the recorded information. Intelligent Electronic Devices (IEDs); Substation Central Units (RTUs); Switches; Terminal Servers;Merging Units; RIO modules Multiprotocol (IEC 61850, DNP3, IEC 101/104, Modbus). Graphic Interface (drag & drop mode). Graphic Editor for Logics (IEC 31131, function block diagram). [...]

SW3 L2/L3 PTP – Substation Switch (rack 19″)

IEC-61850 Ethernet Substation Switch The SW3 is a Gigabit/Fast Ethernet substation switch specially designed to perform switching functions (L2) and IPv4 routing functions (L3).  Level 2 capabilities enable deployment of big scale LANs when the main requirements are: port density, switching performance, and logical complexity. Level 3 capabilities offer routing functionality between two or more configured VLANs, with each VLAN being [...]

OPU-1 – Universal PLC Terminal for HV lines.

A Universal Power-Line Carrier (PLC) Terminal that integrates a great variety of interfaces that allow the simultaneous transmission of analog and digital channels including different possibilities for the transmission of teleprotection signals. Two available modulation schemes for the transmission of digital channels (QAM & OFDM). Key features Complies with IEC 60495 and IEC TS 61000-6-5 standards. Frequency range of 36 [...]

TPU-1 – Universal Teleprotection Terminal for HV Lines

Highly flexible configuration for diverse applications, compatible with IEC 61850 ed 2 standard. It can be used in any available communication media. Key features Complies with IEC 60834-1 and IEC TS 61000-6-5 standards. Complies with ANSI IEEE C37.90.1 and ANSI IEEE C37.90.2 standards. Compatible with IEC 61850 standard. One or two analog and/or digital channels. With two channels, it can [...]

RTF – (AVR) Automatic Voltage Regulator – IEC 61850

Automatic voltage regulation (AVR) for up to 5 power transformers in parallel. Parallel transformer regulation by master-slave, circulating current and negative reactance methods. It also includes line voltage drop compensation. AVR Key Features Voltage Regulation. Maintains the transformer output voltage at the setpoint value, calculating the difference between the measured voltage and the setpoint voltage and comparing it with a threshold [...]

Products

A complete portfolio of in-house developed equipment and systems for Smart Energy Networks You can write a keyword or use the filters to find the products that match your searching criteria.   Search Product {{ props.row.ied }}

Substation Automation Systems

Search Product {{ props.row.ied }} 1 Feeder Protection IRF – Modular Feeder Protection Relay IEC 61850 2 IRL – Compact Feeder Protection IRV – Feeder Protection (“V” Platform) Line Protection DLF – Line Differential Protection Relay IEC 61850 ZLF – Distance Protection Relay IEC 61850 2 ZLV – Distance Protection (“V” Platform) DLX – Line Differential Protection (“X” Platform) Transformer [...]

ZIVercom

is a graphic, user friendly software designed to provide local or remote access to every protection and control IED function, allowing also the retrieval of stored historical and real time data. LiteratureSoftware download: ZiverCom 1.96 r8 (ESP): ZIVercomCastellanoV1.96R8 ZiverCom 1.95 r05 (FRA): zivercom_v1_95_r05_fra ZiverCom 1.93 r00 (POR): ZIVercom_v1_93_r00 ZiverCom 1.90 r09 (ENG): ZivercomEnglishV1.90R09 Manuals ZiverCom Communications Program:  BCOM1204Av00

Library

Please Login to download secured files (Manuals & Software applications). If you don’t have a User Name and Password yet, please go to the Registration Area. Substation Automation Systems Protections Feeder Protection IRF – Modular Feeder Protection Relay IEC 61850 2 Instructions Manual: M0IRFA1807Iv25 (E) M0IRFA1807Pv04(PT) – rev 04.2022 Data Sheet:  H0IRFA1807Iv03 (E)   H0IRFA2203Fv00 (F)  H0IRFAA2203Pv00 (PT)– rev 04.2022 IRL [...]

Home

ZIV is a technology partner that provides HV, MV and LV solutions to TSOs, DSOs and EPCs across the globe. Substation Automation Systems Communication Solutions Distribution Automation Solutions Metering solutions (AMI) AC chargers for electric vehicles Latest news: Advanced Phase Selection for Severe Line Protection RequirementsABSTRACT This paper describes a new phase selector that operates reliably during many unfavorable conditions, [...]

ZIV

ZIV was founded in 1993 to provide innovative technological solutions for the electric energy industry It is a technology partner that offers a broad portfolio of smart grid solutions To Utilities, EPCs & IPPs across the globe With the support of a team of 400 professionals located in 10 sites Committed to R&D and to continuous improvement as expressed in [...]

Access

ZIVercomPlus

The ZivercomPlus software package provides a friendly interface to program all the IED features and settings, and access all the recorded information. Communications can be established directly via local or remote ports, with flexibility to use RS232C ports with direct null-modem cable, modem connections, LAN connections, or via the Substation Central Unit for TCP/IP environments. The software includes an oscillography [...]

Login

Email Address Required Password Required Email or Password no valid Reset password If you need help to reset de password, please let us know *First Name Required *Last Name Required *Email Address Required *Company Required *Phone Required *Country Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados [...]

Registration

User Registration required to download Product Manuals and Software applications. Thanks for your interest in our solutions. Please, complete the form with your professional data. Note that our business policy doesn't allow to give access to the registered area to those people with no professional e-mail (Gmail, Hotmail, Yahoo, Live, etc.). Please introduce your requesting through your corporate mail address. [...]

Registration error

You can not register with the information provided. Check if the supplied email already exists or if you have entered any other error. Thank you.

Registration in process

You will receive a mail with indications to complete the process and enter the system soon. Thank you.

Reset password

We sent you an email with your new password.

Contact

Consent *First Name Required *Last Name Required *Email Address Required *Company Required *Phone Required *Country Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegowina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso [...]

Contact. Message not sent

Your message could not be sent. Please introduce your requesting through your corporate mail address. We do not contact people with no professional e-mail (Gmail, Hotmail, Yahoo, Live, etc.).

Contact. Message sent correctly

Thanks for contacting us. Your message has been sent correctly.

Cookie Policy

1. Definition and use of cookies A cookie is a file that is downloaded on your computer (or mobile device) in order to store data that can be updated and recovered by the entity responsible for installing it. Our site uses cookies to get information on the use of the web site. We inform you that we can use the cookies […]

ZIVerCID

allows the user to edit ICD, CID and SCD files in an easy and simple manner, as well as file data retrieval. simplifies the configuration of dataSets, RCBs and communications data. LiteratureSoftware download: ZiverCID 2.11.3.1: ZIVERCIDv2.11.3.1 Manuals ZiverCID IEC61850 Files Editing Program:  BCID1207Av01

CPT – Unidad Central para Automatización de Subestaciones

Solución integral tanto para renovación de subestaciones existentes como para instalaciones nuevas. Un único equipo, con una potente y amigable herramienta de configuración adecuado tanto para la automatización de subestaciones de compañía eléctrica como de plantas de generación renovable. Amplia disponibilidad de protocolos de comunicaciones, tanto “legacy” como los más actuales según la Arquitectura de Referencia de IEC 62357-1 (IEC [...]

DERMS FAQS

The increase in DER (Distributed Energy Resources) has generated the need for a smart system able to manage network constraints and maximize the network capacity. We invite you to learn all about DERMS here: the need, the key features, system architecture, benefits & use cases. Enjoy it! FROM CENTRALISED TO DISTRIBUTED GENERATION Distribution networks were traditionally designed to deliver power [...]

Smartgrid Deployments – cases

A quick view of some Success Stories ZIV smart meters for Saudi Arabia’s smart grid deployment – SECZIV, and its mother company ALFANAR, have been able to locally produce and deliver 550,000 smart meters to the Saudi Electricity Company (SEC), through the Group´s EPC company Alfanar Construction. 550,000 smart meters Dual communication technology: PLC-PRIME 1.4 FCC and NB-IoT A project [...]

Distribution Automation

Are you thinking about MV & LV grid digitalization? We would like to share some answers to these questions. Why? MV and LV, or both? How? Potential benefits… and much more Take a minute to see our extensive portfolio and do not hesitate to contact us and talk about use cases, potential applications and how can our technology and expertise help you. [...]

Communications

LAN & Cellular LibraryPlease Login to download secured files (Manuals & Software applications). If you don’t have a User Name and Password yet, please go to the Registration Area. Substation Automation Systems Protections Feeder Protection IRF – Modular Feeder Protection Relay IEC 61850 2 Instructions Manual: M0IRFA1807Iv25 (E) M0IRFA1807Pv04(PT) – rev 04.2022 Data Sheet:  H0IRFA1807Iv03 (E)   H0IRFA2203Fv00 (F)  H0IRFAA2203Pv00 (PT)– [...]

MV Automation

RTUs Project Engineer – Software Systems (UK)Job description These roles are based in ZIV Automation UK, located in Newcastle-upon-Tyne, UK. These are a key roles in a new area for the business delivering IT solutions to customers. The candidates must have relevant experience in integrating and delivering software systems, including requirements management, test environments & platforms, system integration, test, QA, [...]

Relays

Project Engineer – Software Systems (UK)Job description These roles are based in ZIV Automation UK, located in Newcastle-upon-Tyne, UK. These are a key roles in a new area for the business delivering IT solutions to customers. The candidates must have relevant experience in integrating and delivering software systems, including requirements management, test environments & platforms, system integration, test, QA, and [...]

ZIVerLOG

Allows easy configuration of the control module of integrated protection and control IEDs. Configurations are programmed and compiled off-line for convenient file uploading to the IEDs. LiteratureSoftware download: Ziverlog 5.33: Ziverlog_533 Manuals: Ziverlog Configuration Program:  BLOG1309Av00

Papers and Application Notes

The Library NEW PAPERS presented at the PACWorld Conference 2002! #69 Advanced Phase Selection for Severe Line Protection Requirements # 70 Impact of Renewable Energy Sources on the Protection of MV Distribution Networks   Papers: Nuevos requisitos para bus de proceso Improvements in line differential relays_pac_2018 Proteção diferencial de barras: requisitos e testes de validação Implementación y pruebas de un [...]

Projects

Basque CountrySpainEurope Basque Country MUGIELEC Development of infrastructure and energy management systems associated with the electric vehicle Program: ETORGAI Project leader: ZIV Technological coordinator: Tecnalia Partners: Companies: AEG, Fagor, Cementos Lemona, Gamesa, Iberdrola, Incoesa, Indra, Ingeteam, Ormazabal and Semantic Systems. MUGIELEC is a project that brings together the main stakeholders in the electrical sector of the Basque Country to respond [...]

Automatización de la red de media y baja tensión

Soluciones y sistemas de monitorización y automatización de la Red de Distribución Compact switchgear (RMU) Automation SolutionsCybersecure Monitoring and Automation solution for non-extensible Ring Main Units (RMU) in underground distribution networks. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). It connects with SCADA and Control Centers systems using standard protocol IEC 60870-5-104, making [...]

MV & LV Systems

Solutions for MV switchgears, RMUs, OHLBS and ANM systems Compact switchgear (RMU) Automation SolutionsCybersecure Monitoring and Automation solution for non-extensible Ring Main Units (RMU) in underground distribution networks. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). It connects with SCADA and Control Centers systems using standard protocol IEC 60870-5-104, making FLISR solutions possible [...]

Oscillo Viewer

Treatment of files in 4 different formats, Graphic representation of information captured in analog as well as digital channels, Analysis of these graphs and Phasor calculation. LiteratureSoftware download: Oscillo Viewer 1.10: oscilo_1.101

MV & LV Systems – cases

Solutions for MV switchgears, RMUs, OHLBS and LV supervision Compact switchgear (RMU) Automation SolutionsCybersecure Monitoring and Automation solution for non-extensible Ring Main Units (RMU) in underground distribution networks. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). It connects with SCADA and Control Centers systems using standard protocol IEC 60870-5-104, making FLISR solutions possible [...]

Altair – Controllers for Distributed Generation Management.

Altair is a Family of High Reliability Robust Controllers for Managing Distributed Generation and Optimising Generation Capacity The Altair family of Generation Management Controllers have been developed in response to industry demand for intelligent management & control of Distributed Generation. The exponential increase in the adoption of Distributed Energy Generation such as Photovoltaic (PV) and Wind has introduced significant challenges […]

LV Supervision cabinets

Advanced low voltage supervision solutiona to monitor LV fuse panels and outgoing feeders.  LV supervision systems  provide full visibility of the LV network, by monitoring each one of the outputs of the LV fuse boards, to enable advanced supervision functionality. The solution consists of current sensors (LPCT), measurement units (5CTI) and a controller (4SLV) that fare either integrated in the [...]

Control cabinets

Compact switchgear (RMU) Automation Solutions Cybersecure Monitoring and Automation solution for non-extensible Ring Main Units (RMU) in underground distribution networks. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). It connects with SCADA and Control Centers systems using standard protocol IEC 60870-5-104, making FLISR solutions possible for Distribution System Operators (DSO). Overhead LBS – [...]

ZIV Workbench

Is a Windows© based configuration and diagnostic tool. It provides user-friendly system configuration with simple copy and paste facilities from Excel© spreadsheets and simple intuitive interface. Configuration is done independently on the PC and the resulting database is downloaded to the target system. Our products support an upload facility whereby the configuration can be uploaded from the product to reproduce [...]

ANM – Active Network Management System

ANM. Adaptive Real-Time power flow, fault level modelling and Control for every level of the distribution network. Control over active devices like on-load distribution transformers, voltage regulators, capacitor banks and generation control systems to obtain constraints analysis, voltage optimization, power factor control,  fault level monitoring, post fault switching, and more functions to manage the system. ANC Controller The ANC Controller  [...]

Compact switchgear (RMU) Automation Solutions

Cybersecure Monitoring and Automation solution for non-extensible Ring Main Units (RMU) in underground distribution networks. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). It connects with SCADA and Control Centers systems using standard protocol IEC 60870-5-104, making FLISR solutions possible for Distribution System Operators (DSO). TCA-C product data sheet:  F0TCAC1811Iv00

Directional Protection Relay for Distributed Network Operation

+++++++ Application requirements Communications media with Low Latency and High rate bandwidth (FO, 4G) Distribution networks with Automatic Circuit Breakers (ACB), underground or overhead switchgear --> Real operation capacity in fault conditions Hardware- default configuration 5 digital outputs 2 Commands (TC CCx y CAx) 3 Alarm Signaling (TS51,TS67,TS_PRES_V) 6 digital inputs 2 Ethernet ports [...]

Overhead LBS – Load Break Switch Control Cabinets

LBS Control Cabinet. Complete and standalone solution for overhead line operation based on Cybersecure Monitoring and Automation solutions. It comprises the controller, the power supply and a variety of communications interfaces. By means of private or public communication networks, it connects field devices with SCADA and Control Centers systems.  Standard protocols (IEC 60870-5-104) enabling automated FLISR are used. As a [...]

News and Events

News + Protection of MV Distribution Networks July 19, 2022August 7, 2022 Impact of Renewable Energy Sources on the Protection of MV Distribution Networks ABSTRACT Given the speed of renewable energy... + Advanced Phase Selection for Severe Line Protection Requirements July 1, 2022August 7, 2022 ABSTRACT This paper describes a new phase selector that operates reliably during many unfavorable conditions, [...]

Survey: Day 10/19

Soluciones para redes de baja tensión e infraestructura de recarga. Visión a 3 años Valore del 1 al 5 (siendo 1 la valoración más baja y 5 la más alta) 12345 La SALA ha resultado cómoda 12345 El CONTENIDO ha resultado interesante 12345 El grado de DETALLE/PROFUNDIDAD con el que se ha abordado cada temática ha sido adecuado 12345 Si [...]

Survey: Day 10/18

Sistemas de automatización, protección y comunicación para subestaciones primarias y secundarias Valore del 1 al 5 (siendo 1 la valoración más baja y 5 la más alta) 12345 La SALA ha resultado cómoda 12345 El CONTENIDO ha resultado interesante 12345 El grado de DETALLE/PROFUNDIDAD con el que se ha abordado cada temática ha sido adecuado 12345 Si le ha parecido [...]

Events

We’d love to see you at our next event! Past events + ZIV at ENLIT 2022 November 29 - December 1, 2022 Join us at ENLIT 2022 & discover  our 20 minutes webinars if you are not travelling this year. Get... + STPC 2022 | ZIV Papers on Cybersecurity & MV protections October 24 - October 27, 2022 The STPC [...]

Smart Charging – AC chargers for electric vehicles. ZIV Spot

Smart Grid - Smart Metering - Smart Charging Easy installation Static & Dynamic load power balance Communications 4G / OCCP 1.6J / Modbus Integrated smart energy meter Mode 3, type 2 or type 1 cable Authorisation RFID, APP or free-charge mode Possibility of custom design ZIV spot Smart Charging | AC chargers for Domestic & Corporate Use Smart, compact and [...]

Media Relations

We  work with our Utility Customers Worldwide to implement Smart Grid Solutions to benefit  customers and communities around the world. We participate in main trade show events, and technical fora to share our experience and point of view about the future of energy transmission and distribution. We welcome your inquiries, interview requests, and questions about news releases, events and innovative [...]

News

News about publications, contracts, agreements, ZIV products and solutions. + Protection of MV Distribution Networks July 19, 2022August 7, 2022 Impact of Renewable Energy Sources on the Protection of MV Distribution Networks ABSTRACT Given the speed of renewable energy... + Advanced Phase Selection for Severe Line Protection Requirements July 1, 2022August 7, 2022 ABSTRACT This paper describes a new phase [...]

News

News about publications, contracts, agreements, ZIV products and solutions.

Thank you!

Every Autumn, We are happy and proud to meet in a nice European City to share some time & experiences on the occasion of the European Utility Week, where we can show you our new ideas, enjoy a cup of coffee and chat. When the night comes, we really love that you find a moment to join us and relax. Thank you! Kind regards, ZIV [...]

Training event calendar

The key to properly apply and maintain the new technologies for each specific case Seminars and Training Courses have been a tradition at ZIV since its stablishment We combine both, high level of knowledge and expertise together with practical workshops, to address the new challenges in the field of Substation Automation & Distribution Automation. Topics: • Introduction to Protection and Control Systems • Introduction [...]

Formacion Online

Bienvenid@ a la plataforma de formación online de ZIV. Esta es la página de registro y acceso al contenido disponible. Al pinchar en cada enlace es necesario poner tus datos y la clave de acceso que te hemos proporcionado. Una vez cumplimentado el primero, el sistema recordará tus datos y rellenará los campos automáticamente. Recibirás un mail para el acceso [...]

OEM – ZIV synergies

ZIV is a solution provider with large international experience that  works closely with several OEM to help them expanding their business by providing: ZIV IEDs approved in utilities worldwide Large field experience Flexible and cost effective solutions to build the best offer for your client. References-2018 We would like you to consider complementing [...]

Prime gateway – 4SPN

Prime to cellular DLMS gateway. Effective solution for low density distribution areas. Built-in Prime base node and 3G modem Optional outdoor compact enclosure

Automation Devices (RTUs)

Substation Central Units Altair – Controllers for Distributed Generation Management.Altair is a Family of High Reliability Robust Controllers for Managing Distributed Generation and Optimising Generation Capacity The Altair family of Generation Management Controllers have been developed in response to industry demand for intelligent management & control of Distributed Generation. The exponential increase in the adoption of Distributed Energy Generation such [...]

ACA-1R – Sensor for Distribution Automation and AMI deployments

Resistive voltage sensor intended for installation into a symmetrical tee connector in gas insulated switchgear (GIS). ACA series sensors and couplers are an essential component for Distribution Automation and AMI deployments. The ACA series provide high accuracy sensors and superior performance broadband PLC couplers for MV gas insulated switchgears.  ACA series sensors are must have devices for distribution automation deployments. Enabling an unprecedented degree of integration by providing a compact design [...]

DRMO-1/10K/05 – Voltage Sensors for Air Insulated MV Facilities

Essential Component for MV Distribution Automation Deployments DRMO sensors provide high accuracy MV measurement for indoor and outdoor air insulated switchgear. They are are a must have device for distribution automation deployments in overhead and underground medium voltage networks. The compact design enables a perfect fit in MV indoor and outdoor air insulated switchgears. The DRMO has 0.5% accuracy class, [...]

TCA-A – MV RTU with FPI function

TCA-A: Directional Fault Passage Indicator (FPI) and switchgear monitoring for Overhead or Underground Distribution Grid. Medium Voltage Grid Monitoring for Distribution networks with FPI function.  Overhead or underground lines. Fault Location solution for semiautomated Distribution Networks through IEC 60870‑5‑104 communications. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). Key features Powerful programmable logic engine. 2500 event log and five Fault Registers (TCA-D/E 4000). [...]

TCA-C – MV Supervision & Automation RTU for compact RMU

MV RTU with built-in directional Fault Passage Indicator (FPI) for compact 2 and 3 feeder Ring Main Units (RMU). Cybersecure Monitoring and Automation solution for compact switchgears in underground Distribution Networks. Suitable for a variety of grounding systems (solidly-grounded, impedance grounded, isolated or compensated-Petersen coil grounding). It connects with SCADA and Control Centers systems using standard protocol IEC 60870‑5‑104, making [...]

TCA-D – MV RTU for Overhead Load Break Switch and extensible switchgears

A combination of a remote terminal unit (RTU), a medium voltage supervision system and a control and automation system specially adapted to be used in overhead lines. 2TCA-D (1/3 rack) model integrates all functions required to cover the complete protection of overhead lines and so, it is applicable in load break switches (LBS) where a supervision of the parameters of [...]

TCA-E – Distribution Automation RTU with embedded FPI

A combination of a remote terminal unit (RTU), a medium voltage supervision system and a control and automation system specially adapted to be used in modular assemblies and secondary substations The device integrates all functions required to cover the complete protection of modular assemblies and so, it is applicable in secondary substations and overhead line switchgear, where a supervision of [...]

Flexible MV RTU

A MV Flexible RTU  ideally suited to Distribution Automation.   Key features Compact Modular Unit Low/Medium I/O Counts 2x Ethernet Ports + 4x Serial Ports Downloadable Functionality Extensive Security Features Secure Web HMI – Full Network Line Diagram Centralised Software management

USP 020 – Multifunction RTU for MV/LV switchgear applications

Telecontrol, FPD, MV and LV supervision in a modular device The USP remote controller is an advanced multipurpose RTU ideally suited to Distribution Automation. Its modular design facilitates the automation of different MV facilities: modern compact RMU, overhead interrupters & reclosers. It offers a cost effective solution for extensible MV/LV switchgear applications and LV feeder monitoring. In addition to standard [...]

XCell – Automation Platform for HV and MV Substations

The Ideal Platform for New Substations, facilitating the Integration of IEC 61850 and DLMS Smart Meters. XCell is an advanced substation automation platform designed specifically for HV and MV substations. Its state-of-the-art technology provides real-time access to hardwired plant data, intelligent IEDs, networked IEC 61850 devices and smart meters. This makes it ideally suited for new substations or upgrade and [...]

Xcell Compact – Cybersecure Substation Gateway

Compact Solution for T&D substations (Gateway / HMI / HMI + Gateway) Substation’s IED integration via industrial communications protocols. Substation gateway. Local and remote HMI through webserver. IED and legacy RTU integration of existing systems. Three modes of operation: Gateway. Connects the substation’s IEDs (Level 1) with the control center’s SCADA (level 3). HMI. Serves as a local SCADA for substations without remote communications. HMI + [...]

LV Supervision Systems & Devices

An advanced low voltage supervision solution to monitor LV fuse panels and outgoing feeders. It provides full visibility of the LV network, by monitoring each one of the outputs of the LV fuse boards, to enable advanced supervision functionality. The solution consists of current sensors (LPCT), measurement units (5CTI) and a controller (4SLV) that fare either integrated in the LV [...]

4SLV – Advanced low voltage supervision solution

Advanced low voltage supervision solution to monitor LV fuse panels and outgoing feeders. It provides full visibility of the LV network, by monitoring each one of the outputs of the LV fuse boards, to enable advanced supervision functionality. The solution consists of current sensors (LPCT), measurement units (5CTI) and a controller (4SLV) that fare either integrated in the LV panel or in a cabinet. The measurement data and events are [...]

5CTI – Low voltage feeder supervisor

Complete LV supervision functionality for a LV feeder Key features Compatible with 4SLV or USP0220 supervisor nodes (connecting 5CTI supervisors through RS485 isolated port). Independent case model and built-in model in low voltage fuse panels. Related LV Supervision  Literature Data Sheet:               5CTI Data Sheet - r2.1 Product Brochure:   ZIV LV Solutions - r1

5LVS – LV supervision system (basic)

A compact unit ready for double secondary winding MV/LV transformers Versatile MV /LV transformer monitoring Key features One and two winding transformer (B1, B2 and B1/B2) monitoring: Oil temperature, Hotspot calculation Energy and power quality measurement: Balancing metering, power quality monitoring, LV ground fault detection Cybersecure communications: Transport layer security encryption, Certificate exchange Related LV Supervision  Literature Data Sheet: Product [...]

5VTN – Neutral to ground voltage supervisor

Ground fault detection in LV networks by measuring neutral to ground voltage in the secondary substation   Compatible with 4SLV supervisor nodes (connecting 5VTN through RS485 isolated port). Related: LV Supervision  Literature Instructions Manual: Product Brochure: ZIV LV Solutions - r1

Meters & AMI

A complete, interoperable and standard based solution portfolio from the pioneer company in large metering rollouts. Smart Metering systems offer many options and capabilities that were not possible with traditional meters. These range from remote load shedding and meter reading to time of use tariffs and power quality measurement. Depending on the technical functionality or grid characteristics, different communication architectures [...]

4BCC – Uninterruptible power supply

The 4BCC is a secure power supply intended to support smart grids cabinets or complete switchgears. It is suitable for both 24 and 48 VDC battery systems (Lead-gel high performance kits). Key features Secure power supply to support smart grids cabinets or complete switchgears Lead Acid Batteries support – Configurable charge profile 48/24 VDC Output Two different models: 100 W and 250 W power Embedded [...]

FBBP – Notch Band Filters

Filters to mitigate conducted disturbances in LV networks Filters designed to mitigate conducted noise generated by domestic or industrial appliances. Key features For enhance remote meter reading. Specially designed to mitigate interferences in the CENELEC-A EN 50065 frequency band (PRIME, G3, Meters & More). Low pass or tuned blocking filter (filter impedance does not affect normal meter operation). Single-phase, with [...]

Indoor & Outdoor Cabinets

Related Metering Solutions

Data concentrator units

ZIV DCUs include an advanced low voltage supervisor and Powerline Communication (PLC) controller with network monitoring functions, in addition to remote smart meter management functions. Smart meter management The main function of a Data Concentrator Unit (DCU) is to continuously poll the metering devices connected to the same secondary substation where it is connected. The retrieved meter data is stored in the DCU and periodically sent [...]

4CCT – Smart Metering Data Concentrator for secondary substations

++ A metering data concentrator unit (DCU) that includes an advanced low voltage supervisor and Powerline Communication (PLC) controller with network monitoring functions, in addition to remote smart meter management functions.   Key features Smart meter management Network monitoring (Advanced low voltage supervision function) PLC communications controller (implements protocols widely accepted in smart metering such as DLMS to exchange readings and web services communicate with the [...]

Webinars & Training event calendar

Webinars Agenda You are very welcome to join un in our new series of webinars. As in previous editions, they will be 20 minutes sessions with visual explanations and about 5 min for Q&A at the end. Always on Thursdays from 12:00 to 12:20 CET Click on the buttoms below to register: you will enter a page with all the [...]

4GWC – IP to PLC AMI Gateway

It is the preferred solution for meter data management systems in dispersed areas with low density of consumers. A purely telecommunications gateway transparent to the upper layers. 4GWC enables the remote connection of a DLMS client (ZIV Cloud Data Concentrator) through an IP network (Cellular and/or Ethernet) with the meters installed in the field. The preferred solution for meter data management systems in dispersed areas [...]

Gracias

Gracias por participar en nuestras acciones formativas Si tienes alguna duda, por favor, envíanosla a través del formulario. Seleccionando "Curso/webinar". Estaremos encantados de atenderte. *First Name Required *Last Name Required *Email Address Required *Company Required *Phone Required *Country Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados [...]

4PLM – Multi-utility concentrator

4PLM virtualizes gas/water meters in electricity meters infrastructure. 4PLM gathers metering data values either from gas meters or from water meters. Communication based on DLMS/PRIME over the deployed electricity smart metering network Options:  Wireless M-Bus 868Mhz /  Wireless M-BUS 169 Mhz /  Wired M-BUS Related Metering Solutions

4TGB – Compact metering data concentrator with cellular communications

A metering data concentrator specifically designed for pole mounted transformers. Its compact, easy-to-install and ruggedized design makes 4TGB the preferred solution for meter data management systems in dispersed areas with medium or low density of consumers. The 4TGB integrates all functions required by a Distribution Network Operator (DNO) to manage its smartmeter installed base. The 4TGB also includes a built-in [...]

CDC – Cloud Data Concentrator

+ Cloud Data Concentrator CDC is a key component for AMI deployments as it allows 100% coverage for PLC smart meters. Key features Cloud Data Concentrator is a SW based data concentrator that, on one hand, will manage all the metering data coming from the smart meters that are accessible through 4GWC and, on the other hand, will gather all [...]

Electric Vehicle AC Charging Solutions

Electric Vehicle AC chargers; for domestic and public road environment; single socket and multisocket solutions. The range of ZIV PRV charging solutions has been evolving since 2010 to meet the different needs of an expanding market. We present a set of solutions developed in accordance with international regulations that integrate ZIV own technology in control, communications and measuring systems.  

PRV-M – Electric Vehicle AC Dual socket charger

PRV-M is a smart dual socket EV Charger. A customizable & wall mounted charging solution, designed for public or semi-public spaces. Key features The stainless steel enclosure admits graphics, wraps or lettering for an easy customizable look. The PRV-M allows 2 simultaneous lateral connectors. It enables flexible configuration to charge multiple car brands implementing different connectors (Schuko, IEC 62196 type [...]

RVE – Electric Vehicle Re-connector

+ The re-connector permits installation of charging points with the ITC-BT 52 type 2 layout. Oriented to OEM market (integration within charging points). Key features Controls an external contactor in order to disconnect the charging point in the event of a supply failure, enabling the intelligent meter to reconnect the load from the home. Minimum physical area, DIN rail. Consumption almost nil (μA). Related [...]

Smart Meters

ZIV is the pioneer company in large smart grid deployments. Please, take a minute to discover our PRIME PLC, radio and LTE interoperable and standard based smart meters & DCUs. Do not hesitate to ask us about business cases and lessons learned so far. We have a large expertise in developing and deploying interoperable systems to meet utilities expectations   [...]

IRF – Modular Feeder Protection Relay IEC 61850 2

Protection relay for distribution feeders, transformers and generators, transmission line backup, and BCU (bay control unit). IEC 61850 Certified ed 2. The IRF is applicable in any substation scheme. The protection functions are suitable for any neutral configuration, solid-grounded, resistor grounded, Petersen coil compensated, and isolated. The powerful programmable logic features selectable execution times according to the required priority (2 [...]

5CTA – LTE 4G ESMR5 smart meter | Single & Three Phase

A flexible smart metering platform with LTE cellular technology to share information with the central system (using the DLMS protocol) Plus an interface to communicate with the customer (wireline) and wireless M-Bus communication to gather data from other meters (water, heat or gas meters) Key features: Robust automated meter reading (AMR) solutions for DNOs Energy measurement, load profile and Time of Use (TOU) [...]

5CTB – PRIME – Meters & More – G3-PLC modular meter

5CTB is a flexible smart meter that incorporates a special sealed holster designed to host a pluggable communication module (e.g. LTE Cat 1). It ensures a reliable data transmission, even in the most challenging powerline media conditions: eg. noisy, low impedance lines and the like. The PLC service node integrated is automatically identified in the PLC network (plug and play). Direct & VT-CT connected Smart [...]

5CTD – PRIME PLC smart meter | Three Phase

A plug and play PRIME PLC smart meter with bidirectional communication that is automatically identified in the PLC network Key features Bidirectional communication over PLC (PRIME model and G3 model. Open Standards with ZIV technology). Robust automated meter reading (AMR) solutions for distribution companies. Energy measurement, load profile and Time of Use (TOU) features Data reading, configuration setting changes, date synchronization and [...]

5CTD – VT and CT operated polyphase meter

Key features Bidirectional active & reactive energy measuring, load profile recording, time of use (TOU) tariffs, maximum demand, Bidirectional communications are possible by means of the IEC60870-5-102 protocol which enables not only meter reading but also configuration changes, synchronization etc. Related Metering Solutions

5CTD-E2F – PRIME PLC Industrial smart meter

Multifunction three phase smart meter for industrial and commercial customers. Direct & semi-indirect industrial smart meter using DLMS/COSEM application data. 5CTD industrial meter has been designed for direct connection in voltage and current, 3x127-230/400 VCA; 0.5-10 (80) A, semi-indirect (direct in voltage, indirect in current …/5A). It includes an RS-232 or RS-485 2 wires port to remotely access the meter through a modem and a PLC PRIME [...]

5CTE – Three phase electronic meter

High precision meter for grid measures,  large end user frontier points, and any other type of frontier at which high accuracy measurement of generated, consumed or exchanged energy between the different parties involved is required Energy measurement, load profile and Time of Use (TOU) features, as well as local and remote communication capabilities. Related Metering Solutions

5CTM – PRIME PLC smart meter | Single phase

A PRIME PLC smart meter that provides robust automated meter reading solutions in large smart grid deployments Key features Bidirectional communication over PLC (PRIME model and G3 model. Open Standards with ZIV technology). Robust automated meter reading (AMR) solutions for distribution companies. Energy measurement, load profile and Time of Use (TOU) features Data reading, configuration setting changes, date synchronization and operation [...]

Networking & Sensors

ZIV's portfolio includes networking solutions for distribution networks, broadband PLCs, as well as sensors, couplings and filters for the deployment of smart devices in MV and LV networks. LAN & Cellular EMR – Compact WAN Router for Secondary SubstationsEMR-2 & EMR-4 models are industrial WAN routers designed for data transport services at secondary substations. Both of [...]

ACA-500/ACA-36 – Capacitive Coupler

Capacitive PLC coupler (wideband transmission) For injecting and transmitting the PLC signal over the MV phase-to-ground distribution feeders. Key features For installation into a symmetrical tee connector in gas insulated switchgear (GIS). Dimensions comply with UNE EN-50181 standard. Frequency range: 2 ÷ 30 MHz. Coupling type: Phase-to-ground by capacitor of 500 pF. System voltage (between phases): 24 kVrms (ACA-500). 36 kVrms (ACA-36). [...]

CAMS-10K – Combined Sensor & Coupler

Combined sensor & PLC coupler for MV power lines The CAMS-10K is designed to solve voltage measurement and Powerline Communications (PLC) transmission through Medium Voltage (MV) lines for overhead and underground cable, in masonry switchgear and air insulated switchgear (AIS). It consists of one compact block, which integrates a capacitive PLC coupler and a voltage divider. Key features Complete solution [...]

EMR – Compact WAN Router for Secondary Substations

EMR-2 & EMR-4 models are industrial WAN routers designed for data transport services at secondary substations. Both of them intended for harsh industrial conditions, exceeding the stringent levels of isolation, immunity and protection Key features GSM/GPRS (2G), UMTS/HSDPA (3G) and LTE (4G) transmission technologies. Dual SIM operation to provide access to more than one operator. Fast Ethernet ports with Automatic [...]

SIP – Serial to IP Encapsulator + Versatile Router

Easy integration of Non-IP serial devices into a secure IP network SIP-3 and SIP-5 models have been designed to operate as WAN router and as a serial to IP encapsulation device. They are a versatile communication solution for secondary substations. Key features GSM/GPRS (2G), UMTS/HSDPA (3G) and LTE (4G) transmission technologies. Dual SIM operation to provide access to more than [...]

SW3 – Compact Switch (DIN rail)

IEC-61850 Ethernet Switch for Secondary Substations Small-size switch that fulfills all the required functions to set up a reliable network within a Secondary Substation. Key features Complies with harsh EMC standards. Brings the necessary capabilities to implement the automation of Secondary Substations according to the IEC 61850 standard. Non-blocking architecture. Up to 8k MAC addresses. Mechanical enclosure for DIN rail [...]

UMML – 4G LTE Modem with Worldwide Coverage

4UMML 4G LTE modem provides Wireless Data Communications to enable Remote Control of Smart Grid devices. The 4UMML cellular modem is a compact device optimized for data transmission and using different services offered by the mobile operators. Rapid implementation The 4UMML modem offers rapid implementation of current telecontrol and AMR applications in order to take full advantage of 4G technologies: [...]

Telecommunication Cabinets

Communication has always played a critical role in power systems. ZIV´s  wide experience and extense product range for networking, power line carrier & teleprotection applications, enable easy adaptation to power utility requirements. Over five decades, ZIV has been granted with the confidence of many power utilities that strongly value state of the art devices, backed by 100% in-house development of PLC and teleprotection technology, including the QAM TCM and OFDM [...]

TACM-1 – PLC coupler for Low Voltage

Capacitive coupler for LV networks up to 1 kVrms This coupler is designed to perform the role of interface between the PLC modem and the Low Voltage line, providing galvanic insulation and impedance matching from the equipment side to the line side. Key features For injecting and receiving the high-frequency signals over low-voltage networks up to 1 kVrms. Provides galvanic [...]

ZBP-1 – MV PLC Equipment

MV PLC communications - Distribution Line Carrier for urban environment Main applications: Data transmission in mid-distance levels (urban environment) + Connectivity between Distribution Transformer Centers (DTC). The main purpose of the ZBP-1 is data transport for services in Medium Voltage Secondary Substations to a Primary Substation. The ZBP-1 is a good option for transmitting data at high speed between Distribution [...]

Protection & Control Relays

Complete and Reliable Solutions for Digital Transmission and Distribution Substations Modular, Flexible & Cybersecure Protection IEDs designed to meet the most demanding requirements in each Application Field HV Lines / Transformers / Busbars and Breakers / Feeders / Motors / Bay Control Applications / Grid Automation   General characteristics of the Flex Family Powerful programable logic. 9 2000 event log. [...]

6IRV – Bay Control and Breaker Management Unit

Integrated Solution for Control, Monitoring and Protection for Simple or Double Breaker Bays The IED generically designated as 6IRV combines all the necessary functions required for full control, supervision and protection of a breaker. These IEDs incorporates Breaker Failure protection, Recloser and Synchronism Supervision. Also, 6IRV relays incorporate backup protection units like Overcurrent, Over/Undervoltage, Over/Underfrequency as well as Control and [...]

6MCV – Bay Control Unit

The ideal Complement to Protective Relays for Intelligent Management of Analog and Digital Signals 6MCV relays are the ideal support of protection terminals for intelligent management of a great number of analog and digital signals. There are provided both with local and remote control, graphic bay location, logics and communications. Key Features Programmable Logic. Versatility in communications. Supervision of switching [...]

6RTV – Automatic Voltage Regulator (“V” Platform)

AVR - Transformer Automatic Voltage Regulation and Control 6RTV units integrate power transformer voltage regulation (AVR) via tap changer control, maintaining the voltage within constant. It is of application when voltage must be kept within constant values with the transformer in operation. Key Features Automatic Voltage Controller (AVR) Tap changer. Remote Voltage Set-point Value Control. Current Compensation. Reactive Current Compensation. [...]

8PRN – Disturbance Recorder

A Compact Solution featuring up to 384 samples per cycle with Ethernet Accesibility 8PRN recorders cover oscillographic applications requiring very high performance signal acquisition and data storage, where the recording functions of digital relays do not meet the application requirements. A typical use of these recorders is in power generation where the frequency spectrum of the relevant events require extremely [...]

ADF – Advanced Directional Fault Detector

Compact RTU with advanced protection, automation, monitoring and distributed generation functions Designed to implement MV automation in RMU & recloser applications with different grounding method (grounded grids, ground isolated grids or compensated via Petersen coil). Key features IEC 61850 protocol used to share information via Goose Messages from one device to another. Coordination schemes supported. Software integration of the current measurement coming from Rogowski coil. Compatible with active [...]

BCV – Capacitor Bank Protection IED

A Complete, Reliable and Economic Solution for most Capacitor Bank Protection and Control Applications BCV relays incorporate protection, control, and metering functions for capacitor bank and reactance applications combining the specific protection functions with complete bay protection in a single IED. Key Features Based on the latest digital technology and designed to provide maximum flexibility and versatility. Voltage unbalance protection [...]

CPI – Overcurrent Protection

Overcurrent (Directional and Non-Directional) Protection Relay, Metering and Communications The CPI relays are applicable in all of those circuits (feeders, machines, transformers, etc.) where protection against overloads and short-circuits (between phases and to ground) is required. In systems with isolated neutral (67 NA), where high sensitive protection for faults to ground is needed, one directional protection unit is also recommended. [...]

DBF – Distributed Busbar Protection

Distributed busbar differential protection for up to 24 bays and 4 busbars, with ethernet HSR or PRP redundant communication between the central and bay units, based on process bus IEC 61869-9 SV, IEC 61850-8-1 GOOSE and PTP IEC 61850-9-3. General features of central and bay units: Powerful programable logic. 2000 event log. Up to 100 oscillography seconds. Alphanumeric or graphic [...]

DBC – Busbar Protection Central Unit

Distributed Low-impedance Busbar Differential + Breaker Failure Protection (Central Unit) DBN Systems consists of one Differential Central Unit (DBC), and a Bay IED (DBP) per line on the bus. The DBN System can be configured to protect any substation scheme (singlebus, double-bus, transfer bus schemes, sectionalized schemes, etc.) up to 4 buses and 28 lines. Additionally, it is also possible [...]

DBP – Busbar Protection Bay Unit

Distributed Low-impedance Busbar Differential + Breaker Failure Protection (Bay Unit) DBN Systems are suitable for substations with up to four or five buses (depending on model), and up to 14, 28 or 32 current bays. Up to 4 bus voltage DBP type bays are available as a function of the selected model Key Features Overcurrent and undervoltage supervision units. Breaker [...]

DCV – Busbar Protection Bay Unit + Capacitor Bank Protection

All protection, control and metering functions required by any Capacitor Bank or Reactance Bay, featuring also complete Bus Differential Bay Unit functionality DCV systems are designed for Substations where it has been planned or it can be planned in the future the installation of the Bus Differential Protection Unit. The reduction of the cost, due to the integration of the [...]

DLF – Line Differential Protection Relay IEC 61850

Line Differential Protection with Distance Backup. Both functions are suitable for lines of any Voltage Level, Overhead or Under Ground, Multiterminal, and Single or Parallel Circuits The DLF includes all the protection, control and measurement functions for a power line with or without Series Compensation, Single Breaker, and Single or Three Pole Tripping. The fast Differential Unit, complemented by the [...]

DRV – Busbar Protection Bay Unit + Feeder Protection

Integral Protection and Control Bay Unit as Terminal of a Distributed Bus Differential Protection The IED generically called DRV integrates protection, control and metering functions for a great variety of applications, such as feeders, machine lines, frontier points, etc. DRV systems are designed for medium voltage lines, transformers, generators and feeders in general where a complete protection of the position [...]

FGI – Frequency Protection

Overfrequency and Underfrequency Protection, Metering and Communications Frequency is one of the defining parameters for "Power Quality" in electrical networks. During normal system operation (balanced generation and load) the power system frequency remains stable and usually very close to its rated value. When fault conditions are present or in this situations where the generation - load balance is disturbed, the [...]

IDF – Transformer Protection Relay IEC 61850 2

Protection relay for two or three winding transformer or autotransformer, of any voltage level, with single or double circuit breaker. IEC 61850 Certificate ed 2 Suitable for phase-shifting transformers, Scott or Leblanc transformers. The IDF is applicable as a differential protection for reactances, SVCs, generators and motors. A fast differential unit, complemented by advanced blocking and harmonic restraint logics and an external [...]

IDV – Transformer Differential Protection

A Complete solution for Transformer Bays and other Machines IDV Relays include all Protection, Control and Measurement functions for Two or Three Winding transformers or autotransformers at any voltage level, with Single or Double Breaker. It may also be applied as differential protection in Reactances, Generators or Motors. Key Features Solid State Trip Outputs. Differential Unit with Percentage and Harmonic [...]

IDX – Transformer Differential Compact Protection

Complete and Innovative solution for Transformer Bays and other Machines The IED generically called IDX integrates protection, control and metering functions for a great variety of applications of transformers and autotransformers. These IEDs use the most advanced digital technology based on a potent microprocessor and DSPs that incorporate differential protection, overcurrent protection, voltage protection, frequency protection, overexcitation protection and others. Protection and control IEDs [...]

IRL – Compact Feeder Protection

Multifunction Protection for MV Power Systems & Industry. For Grounded or Ungrounded Schemes Compact Feeder Multifunction solution for MV switchgear, with Load Shedding Function to ensure the stability of the system, Back-Up performing capability in HV lines and powerful built-in Control Logic Module. Key Features 50/51 - Phase O/C. 50N/51N - Neutral O/C. 50G/51G G- round O/C. 50Ns/51Ns - Sensitive [...]

IRS – Self-Powered Relay

Self-powered Overcurrent and Breaker Failure Protection Relay with Harmonic Blocking Where dependable auxiliary power source is not available, the IRS Relay can be energized either directly from Main Current Transformers, AC/DC Auxiliary Voltage or through the USB Front Port. To guarantee the correct operation of the relay, ZIV offers a bistable linear solenoid which perfectly matches the energy output of the IRS [...]

IRV – Feeder Protection (“V” Platform)

The IED generically called IRV integrates protection, control and metering functions for a great variety of applications, such as feeders, machine lines, frontier points, etc These IEDs use digital technology based on a potent microprocessor and DSPs that incorporate Directional and Non-Directional Overcurrent Protection, Overvoltage, Undervoltage, Over / Underfrequency, Synchronism, Power Inversion, Thermal Image, Recloser function and others. IRV systems [...]

IRV-Z – Bus Differential / Feeder Protection Bay Unit

The IRV-Z integrates Protection, Control and Metering functions with the complete functionality of a Bus Differential Bay Unit IRV-Z systems are designed for medium voltage lines, transformers, generators and feeders in general where a complete protection of the position is required, in Substations where it has been planned or it can be planned in the future, the installation of the [...]

IRX – Feeder Protection (“X” Platform)

Compact & Flexible Solution for Modular Applications IRX units are designed to provide integrated protection, control and metering solutions in overhead lines, underground cables and feeders in general, as well as in backup protection of bus-bars and transformers. It incorporates a programmable unit that allows the user to define the operational logic of both protection and control functions, to suit [...]

TPI – Over / Under Voltage Protection

Over and Under voltage Protection Relay, Measurement and Communications Overvoltage and under voltage protections are usually inverse or definite time type, with tripping times between 0.2 and 20 s. Instantaneous trip is required in those cases where the magnitude of the overvoltages is considerable. TPI protective relays, are applicable in those installations requiring a reliable detection of voltage fluctuations. Key [...]

ZLF – Distance Protection Relay IEC 61850 2

Subcycle distance protection suitable for lines of any voltage level with any configuration: overhead or underground, single or parallel circuits The ZLF includes all the protection, control and measurement functions for a power line, with or without series compensation, single or double breaker, and single pole or three pole tripping. Eight distance zones with Mho or quadrilateral characteristic, complemented with [...]

ZLV – Distance Protection (“V” Platform)

Selective, Fast and Reliable Protection in Overhead Lines and Cables ZLV relays provide distance protection for power transmission and subtransmission lines. They feature a complete package of functions and protection schemes offering selective, quick and reliable protection both for underground and overhead lines, with or without series compensation. Key features Single or Double-breaker bay protection. 21/21N Distance protection for ground [...]

ZIV e-NET FLEX Protection & Control Relays

Complete and Reliable Solutions for Digital Transmission and Distribution Substations Modular, Flexible & Cybersecure Protection IEDs designed to meet the most demanding requirements in each Application Field HV Lines / Transformers / Busbars and Breakers / Feeders / Motors / Bay Control Applications / Grid Automation     General characteristics of the Flex Family Powerful programable logic. 9 2000 event [...]

Communications

Search Product {{ props.row.ied }} 1 Power Line Carrier Systems OPU-1 – Universal PLC Terminal for HV lines. OPL-1T – Compact Terminal Teleprotection Systems TPU-1 – Universal Teleprotection Terminal for HV Lines ABIT & CDIT – Teleprotection Modules TPPU – Teleprotection Module Line Machine Units and Accesories CHD-4 – Differential Hybrid Circuit HPFA – Differential Hybrid Circuit UAM-4 – Band-Pass [...]

Distribution Automation Solutions

Search Product {{ props.row.ied }} 1 MV Switchgear / LBS / ANM Flexible MV RTU USP 020 – Multifunction RTU for MV/LV switchgear applications MV Switchgear / Fault Pass Detector TCA-A – MV RTU with FPI function TCA-C – MV Supervision & Automation RTU for compact RMU TCA-D – MV RTU for Overhead Load Break Switch and extensible switchgears TCA-E [...]

Metering & AMI

Search Product {{ props.row.ied }} 1 Residential / Industrial / Substation Meter 5CTA – LTE 4G ESMR5 smart meter | Single & Three Phase 5CTB – PRIME – Meters & More – G3-PLC modular meter 5CTD – PRIME PLC smart meter | Three Phase 5CTD – VT and CT operated polyphase meter 5CTD-E2F – PRIME PLC Industrial smart meter 5CTE [...]

Telecommunication Devices

Communication has always played a critical role in power systems. ZIV´s  wide experience and extense product range for networking, power line carrier & teleprotection applications, enable easy adaptation to power utility requirements.   Over five decades, ZIV has been granted with the confidence of many power utilities that strongly value state of the art devices, backed by 100% in-house development of [...]

ABIT & CDIT – Teleprotection Modules

Built-in Teleprotection modules for PLC Terminals The ABIT and CDIT modules constitute an analog teleprotection equipment which can be integrated into power-line carrier (PLC) terminals. Key features Modules that can be integrated into OPU-1 chassis (19”/9 s.u.). ABIT module: one or two commands. ABIT and CDIT modules: from one to four commands. Modules intended for blocking, direct and permissive tripping [...]

AVDM – Built-In Converter

Built-in module to convert Serial into E1 The AVDM is a module that converts an V.24 input port into a 2 Mbit/s G.703 output port. It has an embedded web server for management purposes. Key features Line interface: 2 Mbit/s. Duplex transmission. Codirectional clock. 75 Ω input and output impedance. V.24 data interface: from 50 up to 19200 bit/s. Equipped [...]

CHD-4 – Differential Hybrid Circuit

Differential hybrid circuit for PLC systems over HV lines Connection of a PLC terminal to two or three phases of a power line.Parallel coupling of two PLC terminals which use adjacent frequency-bands. Key features Application: Phase-to-phase coupling. Two PLC terminals coupling. Three-phase coupling. Nominal power (P.E.P): 400 W. Distortion and intermodulation: 80 dB below the level corresponding to the nominal [...]

CIC – Concentrator

Serial device server for Electrical Substations Easy integration of up to 9 serial devices into an IP network. Key features Complies with EMC standards. Easy integration of Non-IP serial devices into a secure IP network. 1 Ethernet switch with two ports (RJ-45 or MT-RJ) and 1 serial dual port RS-232/RS-485 (2-wire or 4-wire). Four or eight additional serial ports for [...]

Substation Automation Systems

Our support centers provide engineering services based on experience and latest tecnhology to optimize the cost and resources of every single project, based on: Well experienced protection, automation and communication engineers. A full range of products with in-house developed technology: Protection and control relays, HV Communication devices, Networking Solutions, RTUs Dedicated R&D & Application resources to fully support the products. A total commitment to customer satisfaction.   # [...]

F2MUX – Universal Converter

The F2MUX family is intended to convert an optical interface into an electrical or optical interface. Available transparent mode to be compatible with any existing protocol. Key features: Complies with IEC TS 61000-6-5 standard. The F2MUX family is able to convert optical (INTF1) into electrical or optical (INTF2). INTF1 operating mode: C37.94. CMI/FM0 at 64 kbit/s, 128 kbit/s, 512 kbit/s [...]

HPFA – Differential Hybrid Circuit

Cabinet-mounted differential hybrid circuit for PLC systems over HV lines Connection of a PLC terminal to two or three phases of a power line. Parallel coupling of two PLC terminals which use adjacent frequency-bands. Key features Application: Phase-to-phase coupling. Two PLC terminals coupling. Three-phase coupling. Nominal power (P.E.P): 400 W. Distortion and intermodulation: 80 dB below the level corresponding to [...]

MAS-2 – Stand-Alone FSK Modem

Stand-alone Asynchronous FSK Narrowband Modem The MAS-2 consists of a 19”/1 s.u. chassis with an embedded single modem module type MAFP. Key features 600 Ω input and output impedance. Data format: Binary, serial. Asynchronous and anisochronous. Modulation: Frequency-shift keying (FSK). Transmission mode: V.23 Full-duplex over 4-wire and Half-duplex over 4 or 2-wire. Transmission speed of 50, 100, 200, 600, 1200 [...]

MDD-3 – Stand-Alone Rack

Stand-alone rack for MAFP/AVDM modules The MDD-3 is a 19”/6 s.u. rack, prepared for containing up to a maximum of 14 modules type MAFP and/or AVDM. Key features Each MAFP/AVDM installed in the rack is independent from the rest as far as external connection and power supply is concerned. Two power-supply inputs per module (redundant power supply). Compact 19"/6 s.u. [...]

MFPU – Built-In FSK Modem

Built-in Asynchronous FSK Narrowband Modem Suitable for point-to-point or point-to-multipoint schemes. Key features The MFPU module can be integrated into an OPU-1 chassis (19”/9 s.u.). Data format: Binary, serial. Asynchronous and anisochronous. Modulation: Frequency-shift keying (FSK). Transmission mode: V.23 Full-duplex over 4-wire and Half-duplex over 4 or 2-wire. Transmission speed of 50, 100, 200, 600, 1200 or 2400 Bd (using [...]

OPL-1T – Compact Terminal

Analogue Power Line Carrier Terminal with Built-in Teleprotection A small-size device that provides different services by installing the appropriate modules into the unit. The fully modular architecture of the OPL-1T also offers an optional built-in analog teleprotection system. Key features Complies with IEC 60495 and IEC TS 61000-6-5 standards. Complies with IEC 60834-1 standard (built-in TP model). Frequency range of [...]

Power Line Carrier Systems

Teleprotection Systems

In the field of teleprotection, ZIV offers a complete product range from simple devices, to the most sophisticated designs. The product portfolio covers encoded, single tone, FSK or Teleprotection over MPLS, and the option of selecting some of the most advanced technical features such as IEC 61850 compliance, transits, teed‑lines, double communication interfaces, and webserver user interface.

TPPU – Teleprotection Module

Built-in Teleprotection module with single or dual tone operation. The TPPU module is an analog teleprotection equipment using tones that offers two distinct operation modes Key features Module that can be integrated into an OPU-1 chassis (19”/9 s.u.). Two operation modes: SINGLE TONE and DUAL TONE. The operation mode using SINGLE TONE is the most traditional. The operation mode using [...]

UAM-4 – Band-Pass Unit

Line-Matching Unit for PLC systems over HV lines Band-pass filter configuration. Good operation in underground cables. Key features  Designed according to IEC 60481 standard (composite loss ≤ 2 dB and return loss ≥ 12 dB in the selected bandwidth). Nominal power (P.E.P): 400 W for two tones. Distortion and intermodulation: 80 dB below the level corresponding to the nominal P.E.P. [...]

UAMC – Compact Band-Pass Unit

Compact Line-Matching Unit for PLC systems over HV lines Band-pass filter configuration. Can include a built-in differential hybrid circuit. Key features  Designed according to IEC 60481 standard (composite loss ≤ 2 dB and return loss ≥ 12 dB in the selected bandwidth). Nominal power (P.E.P): 400 W for two tones. Distortion and intermodulation: 80 dB below the level corresponding to [...]

UAPA-1 – High-Pass/Band-Pass Unit

Adaptable Line-Matching Unit for PLC systems over HV lines Band-pass or high-pass filter configurations available. Can include a built-in differential hybrid circuit. Key features Designed according to IEC 60481 standard (composite loss ≤ 2 dB and return loss ≥ 12 dB in the selected bandwidth). Nominal power (P.E.P): 400 W for two tones. Distortion and intermodulation: 80 dB below the [...]

VDM-1 – Stand-Alone Converter

Stand-alone chassis to convert Serial into E1 The VDM-1 consists of a 19”/1 s.u. chassis with an embedded single converter module type AVDM. Key features Line interface: 2 Mbit/s. Duplex transmission. Codirectional clock. 75 Ω input and output impedance. BNC connector. V.24 data interface: from 50 up to 19200 bit/s. 25-pin SUB-D connector in DCE configuration. Equipped with test devices [...]

4PBN

PRIME communications device for detection and debugging noise and other communications parameters in PRIME networks Different configurable functions: Base node and Service node. Single-phase PLC PRIME signal injection. Serial and Ethernet ports. Data can be sent to ZIV AMI MANAGER tool for further noise, RF and frame analysis.

ZIVERQ

A multi-computer, multiprotocol and multi-connection program, suitable for all the meters developed by ZIV Retrieval, sending and storage of settings, and metering logs. Firmware update Execution of other actions: synchronization, outputs, internal breakers, etc.

ZIV AMI Manager

A specific application for monitoring and managing a LV PLC network. Retrieval and monitoring of information about the physical medium, such as the frequency spectrum, the MAC frames and the Topology of the PLC network.

Relés Proteção IEC 61850 Ed.2 para a Subestaçãoes Digitais de T&D

Segurança Cibernética e Flexibilidade Mais um fornecimento para a ENEL RJ concluído com a colocação em serviço do Sistema de Automação da SE Maria Paula  incluindo o fornecimento de painel IHM e painéis de proteção & controle para duas linhas de entrada – 138kV, dois transformadores, bancos de capacitores e a integração de proteções instalados em vinte e dois cubículos. [...]

Renewables integration – DERM / ANM cases

"ZIV Constellation" is a flexible solution designed accelarate renewables integration. It help utilities worldwide to reach zero carbon targets by enabling them to connect more renewable sources. It increases network reliability whilst maximising the existing assets. It provides a platform that becomes a key tool for utilities in their transition to a DSO. check out our webinars agenda What we [...]

Services

Our Customer support centers provide engineering services based on experience and latest tecnhology to optimize the cost and resources of every single project There is growing need in the electric power industry of supporting engineering services because companies have smaller engineering staffs and increasingly complex requirements. ZIV brings industry-experienced engineers to every project, industry experts able to cooperate with utility experts to place technology at the service [...]

IEC 61850 integrated protection, control, telecommunication systems

SIMPLE, ROBUST AND SECURE SOLUTIONS FOR INTEGRATED AUTOMATION, PROTECTION AND TELECOMMUNICATION SYSTEMS EG. TRANSMISSION | SAS to monitor and improve PGCIL’s transmission capacity in Jharkhand, India ZIV supplied protection, control, communication and monitoring products and systems to Power Grid Corporation of India Ltd (PGCIL) Jharkhand, India. The project was jointly managed with CG’s Engineering Projects Division, India. It was intended to [...]

Substation Central Unit

A comprehensive solution both for the renovation of existing substations and for new installations. The CPT is designed to solve all communication and data processing needs with a substation’s protection, control and metering equipment, providing new functions that make most of the information available to these units. General characteristics The CPT is responsible for communications with level 1 equipment and [...]

Complete SAS for digital substations

Our support centers provide engineering services based on experience and latest tecnhology to optimize the cost and resources of every single project, based on: Well experienced protection, automation and communication engineers. A full range of products with in-house developed technology: Dedicated R&D & Application resources to fully support the products. A total commitment to customer satisfaction.   # SAS # IEC 61850 # Renewables Integration # Digital [...]

System Integrator Program

Provide your customers with a simple, robust and cost-effective solution for Protection, Control Monitoring and Communications. We can we help you expanding your business by providing: Loose items to be delivered if your company has capabilities to build and wire C&R panels as a System Integrator. A configured set of loose items to your company if you have panel manufacturing [...]

People

If you are passionate about challenges, you want to be an active part in the energy transition and participate in the development of the electricity networks of the future, we are your company. A leading company in a sector that will allow you to grow professionally and feel part of a team with a unique innovative spirit. Apply now! Legal [...]

Legal Notice

Privacy Policy ZIV is a company based on a team of professionals with a spirit of permanent collaboration and improvement, which respects fundamental rights and freedoms, including the right to the protection of personal data. The Management is committed to implementing a data protection management system based on the following principles: “Lawfulness, fairness and transparency”: personal data shall be processed [...]

DLX – Line Differential Protection (“X” Platform)

Complete and Flexible Protection for Overhead and Underground Lines The DLX design provides an integrated and complete solution for protection, control, and metering for overhead lines and underground cables. The DLX modular construction and reduced size are specific design requirements for applications in distribution switchgear and metal clad applications. Key Features Differential and directional comparison units for phases, ground and [...]

SmartControllers – Universal Platform for Distribution Automation & Substation Automation

SmartController is a highly flexible monitoring and control unit for use in Distribution Automation or Substation Automation. It can be used for a variety  of applications including, an Intelligent Controller, Data Concentrator, Gateway Unit, RTU, Local Operator Interface and Fault Detection Unit. It is designed to be panel mounted or wall mounted and incorporates a full colour graphics display for […]

Contact
Copyright © 2022 ZIV. All rights reserved.